Belt Sander CONVERSION PARTS FOR Milwaukee M12 Cut Off Saw 2522-20, 3/8" x 13"

Description

NOTE: Air sander and Milwaukee cutting tool will be needed for this conversion, they are not included with these parts.
These are custom made aluminum parts that will convert a Milwaukee M12 cut off tool and a Harbor Freight or similar belt sander into a M12 cordless 3/8" x 13" belt sander or band file.
This only fits the US models 2522-XX with the
3/8 (.375) arbor
. The M12 FCOT -XX has a 10mm arbor and will need a 10mm drive pulley. I can change these to 10mm if that's what you need, just note that at check out so I see it and make a special one.
The air belt sanders can be found at Harbor Freight under central pneumatic, item numbers 60627 or 97055. They can be ordered from harbor freight.com or even on eBay by searching 60627 sander and checking on include descriptions. They are also sold as Rockwood pneumatic 31873. The cut off tool 2522-20 or 2522-21 can be found nearly everywhere.
You will receive 4 items;
a custom machined adapter to hold the sanding arm from the sander, a new drive pulley, a T-8 Torx tool bit, and instructions as shown in the
2nd photo
. Either tool can be converted back to it's original state in a matter of seconds.
I build these on a small garage lathe on evenings and weekends and put these kits together a few at a time, so bare with me as I'm busy as I'm sure you are as well....
If you are looking for the 1/2" x 18" parts kit that uses the Baxter Pneumatic sander, go here:
https://www.ebay.com/itm/274450561719
HF apparently no longer has 20% off store coupons, but i
f you have any questions, please contact me: Five O Seven, Three 8 One, Forty-two Sixty.
Please Note:
For the .05% of you don't read the description and believe they are getting a 0 Milwaukee tool and/or the air belt sander for , I will reiterate, the listing is for the conversion parts only!
Neither
the Milwaukee tool
nor
belt sander are included. And no Karen, I'm not changing the photo just for you.... If you flip out, physically threaten me, and demand something that's clearly not included, you'll be reported to
eBay
. You clearly have no idea what actually goes into machining these for you. If this is unacceptable, you have my address, you are welcome to come see me, I'd be happy to help clear things up for you in person.
If you find you are one of the .05% and want to return it, I will accept the return if you chose "I changed my mind". I won't accept; "item doesn't match the description" or "doesn't work" or "defective". Over a 2000 people now have proven that not to be true. Read my feedback from overwhelmingly
satisfied
users...
Thanks again!