-40%

Belt Sander CONVERSION PARTS FOR Ridgid Multi-Material Saw R87547B, 1/2" x 18"

$ 26.13

Availability: 100 in stock
  • Power Source: Battery
  • Voltage: 18 V
  • All returns accepted: ReturnsNotAccepted
  • Action: Rotary/Circular
  • Battery Included: No
  • Model: R87547B
  • Country/Region of Manufacture: United States
  • Battery Technology: Lithium-Ion (Li-Ion)
  • Brand: RIDGID
  • Color: Silver
  • Condition: New
  • Type: sander
  • Disc Diameter: 3 in

    Description

    NOTE: An air sander and Ridgid cutting tool will be needed for this conversion, they are not included with these parts.
    These are custom made aluminum parts that will convert a
    Ridgid Multi-Material Saw
    and a Harbor Freight Baxter or similar belt sander into a cordless 1/2" x 18" belt sander or band file.
    The air belt sanders can be found at Harbor Freight under Baxter, item number 64932. They can be ordered from harbor freight.com or on eBay by searching 64932 sander and checking the include descriptions box. They are also sold as Eastwood 31455,
    Astro Pneumatic 3037, Northern tool Clutch 47923, or similar. The 3M - 33575 sander is now confirmed to work as well. Check with both Northern Tool and
    Harbor freight
    for specials, they flip-flop, but one always beats the other.
    The Ridgid tool R87547B can be found at The Home Depot.
    You will receive 4 items;
    a custom machined adapter to hold the sanding arm from the sander, a new drive pulley, a T-8 Torx tool bit, and instructions
    as shown in the
    2nd photo
    . Either tool can be converted back to it's original state in a matter of seconds.
    For the 1% of you don't read the description and believe they are getting a 0 Ridgid tool and/or the air belt sander for , I will reiterate, the listing is for the conversion parts only!
    Neither
    the Ridgid tool nor belt sander are included. And no Karen, I'm not changing the photo just for you.... If you find you are one of the 1% and want to return it, I will accept the return if you chose "I changed my mind". I won't accept; "item doesn't match the description" or "doesn't work" or "defective".
    Those have proven that not to be true....
    I build these on a small garage lathe on evenings and weekends and put these kits together a few at a time, so bare with me as I'm busy as I'm sure you are as well....
    If you are looking for the 3/8" x 13" parts kit that use the Central Pneumatic sander, go here:
    https://www.ebay.com/itm/274729724070
    HF apparently no longer has 20% off store coupons, but i
    f you have any questions, please contact me: Five O Seven, Three 8 One, Forty-two Sixty.
    Thanks again!