FIREYE Type EDC2 Direct Coupled Input Flame Amplifier Module NIB

Description

FIREYE Type EDC2 Direct Coupled Input Flame Amplifier Module NIB. Shipped with USPS Parcel Select Ground.
The Fireye Flame Amplifier Modules are used in conjunction with the appropriate flame scanner to provide flame scanning capability in the Flame-Monitor system. Fireye offers ultraviolet amplifiers (EUV1), self-check ultraviolet amplifiers (EUVS4), flame rectification amplifiers for use with flame rods and photocells (ERT1), and auto-check infrared amplifiers: E1R1 (standard model), E1R2 (high sensitivity model), and E1R3 (for solid fuels).
Self-checking ultra-violet scanners and amplifiers should be used in applications where burner firing operation is continuous or where the burner is on for long periods of time (e.g. 24 hours) without cycling.
The flame amplifier must be used with the appropriate flame scanners.
When replacing any flame scanner or amplifier, the burner should be cycled on and off several times to ensure proper operation.
Used With: EP178/EP378 and one or two 85UVF4-1QDWR or InSight flame scanners (with 59-497-020WR cable)
Note: Image may not be actual representation of item.
EDC2 amplifier
The EDC2 amplifier provides connections for 2 Phoenix or InSight scanners arranged such that 1 scanner is used to detect pilot flame and the second scanner is used to detect main flame. The pur- pose of the EDC2 amplifier is to detect pilot flame with the first scanner and then prove main flame propagation in a line burner using the second scanner. During the main flame period or AUTO, the pilot scanner is completely ignored. Conversely, during pilot and main establishing periods, the main scanner is completely ignored.