Mongoose X Decorative Concrete Cutting Saw DEMO

Description

DEMO Unit - Used for 3 training workshops - 1 year warranty still applies.
Engrave straight lines, perfect circles and free form curves with Mongoose X.  Stand up handle does not come with this unit.  Can be added for an additional cost.
Mongoose X Features:
Maximum cutting depth is 1/4"
Power: 120V 10.5A or 230V 3.9A 50/60hz
Size: 13" x 7.75" x 9.5" (LxWxH)
Weight: 15.82 lbs
Min. Side Cut: 4"
Min. Front Cut: 4.5"
Blades available in 1/16", 1/8", 1/4" and 3/8"
Capabilities:
Wood Plank
Tile Designs
Perfect Circles – using center pivot
Perfect Arcs – using center pivot
Straight Lines
Slate / Block
Random Ashlar Slate
Random Ashlar
Offset Block
Random Block
Geometric Designs
Straight Line
Squares
Triangles
Rectangles
Multi-Sided Shapes
Full One Year Warranty On All Parts - Lifetime Warranty on Aluminum Parts
Removable Handle
Ergonomically designed with the operator in mind. Eliminates muscle strain. Handle removes with only 2 set screws for rapid transition to a low profile engraver for confined spaces. Handle sold separately.
Ease of Use Spring-Loaded Cutting Head
Spring-loaded cutting head gives the operator full control of starts and stops. Simply push down to cut, then release and the blade pops out of the cut. On-the-fly adjustments with just the turn of a screw.
Powerful Motor
Upgraded motor has up to 50% more torque and up to 20% higher overload capacity for quicker material removal and longer service life. Automatic Motor Safety Clutch increases operator and machine safety by minimizing sudden kickback during a blade jam.
Precision Machined
INTELLIGENT ENGINEERING: Axle holes are tapped (threaded) at the same time the Mongoose X is machined, resulting in a rigid, accurate and smooth rolling chassis.
Made in the USA from solid blocks of 6061-T6 billet aluminum on state-of-the-art milling and turning centers at the Engrave-A-Crete machining and manufacturing facility. So perfectly crafted that it requires no polishing---but it is.
Blade Port
For the operator who prefers to see the blade during cutting.
Premium Diamond Blade
Specifically tuned to match the motor, the 79mm diameter blade gives increased torque while cutting and less kerf-ramp when ending cuts. Maximum cutting depth is 1/4". Made in the USA.
Lightweight
Easily moves from one position to another in the design. Lessens operator fatigue. Easy to transport and store.
Wide High Traction Wheels
Top of the line, Hy-Grade urethane wheels increase stability and traction
Side Rail Mounting Holes
Drilled and ready for future accessories.
Maximum cutting depth is 1/4"
Power: 120V 10.5A or 230V 3.9A 50/60hz
Size: 13" x 7.75" x 9.5" (LxWxH)
Weight: 15.82 lbs
Min. Side Cut: 4"
Min. Front Cut: 4.5"