NEW Alarm.com Tyco ADC-620T-LTE Cellular Module for DSC Neo Control Panel Z-Wave

Description

This listing includes the following:
One (1)
ADC-620T-LTE Cellular Module for DSC Neo Control Panel with Z-Wave
Brand: Alarm.com (Made by Tyco Security)
Condition:
BRAND NEW!
Module is in the original, factory plastic packaging - NEVER OPENED - NEVER USED!
These modules are exactly as pictured (IMEI numbers will be different for each unit) - there is no housing or any other parts or accessories - just the add-on module ONLY.
Proper application, installation, and compatibility is the responsibility of the buyer - we cannot offer any technical support or advice.
Each board includes an installed Telit Communications LE910C1-AP Module, as seen in the photos, which supports 4G LTE Band 1, 3, 5, 8, 28, with a target market of Asia Pacific, Australia, New Zealand (Telstra/Vodafone AU) - but again, application and usage is the responsibility of the buyer.
BULK QUANTITIES AVAILABLE.
Free Shipping in the continental US!
In-Stock! Ships within ONE BUSINESS DAY of payment!
US Seller!
Please contact us with any questions.
Thank you,
EJC Ventures, LLC
Alarm.com ADC-620T Details:
The Alarm.com ADC-620T Module for DSC Panels is a add-on module that attaches inside of a DSC security panel. It communicates between the security panel and the Alarm.com cloud service via a cellular network. A user is able to remotely control the security panel and its associated Alarm.com Interactive Services (including Z-Wave devices) via a web application or mobile app.
The ADC-620T Module for Neo enables wireless reporting of all alarms and other system events from the DSC Neo control panel using an all-digital, cellular network (if available) or broadband connection (if available). The module can be used as the primary communication path for all alarm signaling, or as a backup to a telephone connection to the central monitoring station. The wireless alarm signaling and routing service is operated by Alarm.com. The ADC-620T Module also features integrated support for Alarm.com’s emPower solution with built-in Z-Wave capabilities. The ADC-620T Module is compatible with DSC Neo panels with software versions 1.3 and later.
The Alarm.com ADC-620T supports the following command classes:
•
Application Status Command Class, Version 1
•
Association Command Class, Version 2
•
Association Group Information Command Class, Version 1
•
Controller Replication Command Class, Version 1
•
CRC-16 Encapsulation Command Class, Version 1
•
Device Reset Locally Command Class, Version 1
•
Manufacturer Specific Command Class, Version 1
•
Powerlevel Command Class, Version 1
•
Security Command Class, Version 1
•
Version Command Class, Version 2
•
Z-Wave Plus Info Command Class, Version 2
The Alarm.com ADC-620T controls the following command classes:
•
Alarm Command Class, Version 1
•
Association Command Class, Version 2
•
Association Group Information Command Class, Version 1
•
Basic Command Class, Version 1
•
Battery Command Class, Version 1
•
Binary Sensor Command Class, Version 1
•
Binary Switch Command Class, Version 1
•
Clock Command Class, Version 1
•
Configuration Command Class, Version 1
•
CRC-16 Encapsulation Command Class, Version 1
•
Device Reset Locally Command Class, Version 1
•
Door Lock Command Class, Version 1
•
Firmware Update Meta Data Command Class, Version 1
•
Manufacturer Specific Command Class, Version 1
•
Meter Command Class, Version 1
•
Multi Channel Command Class, Version 4
•
Multi Channel Association Command Class, Version 3
•
Multilevel Sensor Command Class, Version 1
•
Multilevel Switch Command Class, Version 1
•
No Operation Command Class, Version 1
•
Notification Command Class, Version 3
•
Powerlevel Command Class, Version 1
•
Schedule Entry Lock Command Class, Version 3
•
Security Command Class, Version 1
•
Thermostat Fan Mode Command Class, Version 1
•
Thermostat Fan State Command Class, Version 1
•
Thermostat Mode Command Class, Version 1
•
Thermostat Operating State Command Class, Version 1
•
Thermostat Setback Command Class, Version 1
•
Thermostat Setpoint Command Class, Version 1
•
Time Parameters Command Class, Version 1
•
User Code Command Class, Version 1
•
Version Command Class, Version 2
•
Wake Up Command Class, Version 2
•
Z-Wave Plus Info Command Class, Version 2
This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
Telit LE910C1-AP LTE Cat.1 Module Details:
Telit LE910C1-AP belongs to Telit LE910C1 Series and it's an LTE Cat.1 module supporting download speed to 10Mbps and upload speed to 5Mbps. Telit LE910C1-AP is compliant with the 3GPP Release 10 in s compact LGA form factor.
Telit LTE Cat.1 Module Specs:
* Target market: APAC/ANZ (Telstra/Vodafone AU)
* Support 4G Bands(MHz): B1(2100), B3(1800), B5(850), B8(900), B28(700)
* Support 3G Bands(MHz): B1(2100), B5(850), B8(900)
* Support 2G Bands(MHz): NO
* LTE Cat.1 data rate: Uplink up to 5 Mbps, Downlink up to 10 Mbps
* DC-HSPA+ Download speed to 42Mbps
* LTE FDD Cat.1, 3GPP release 10 compliant
* Rx Diversity and MIMO DL 2x2
* Single Rx option
* VoLTE support
* SMS over IMS
* Built in UDP/TCP/FTP/SMTP stack
* IPv4/IPv6 stack
* Control via AT commands according to 3GPP TS 27.005, 27.007 and Telit Custom AT commands
* SIM application Tool Kit 3GPP TS 51.014
* OMA-DM Telit Software Management
* Simultaneous support of GPS, Glonass, Bei-dou, Galileo, QZSS
* Dimensions 28.2 x 28.2 x 2.2 mm
* Temperature Range: -40°C to +85°C
* REACH and RoHS compliant
* Interfaces
- 181-pin LGA Interface
- 10 I/O ports (@1.8V) including multifunctional I/Os
- USB 2.0 HS / HSIC
- UART
- SPI
- PCM
- 1.8 V / 3 V SIM interface
- RF pad, RX Div. & MIMO pad
* Electrical & Sensitivity
- Output power: Class 3 (0.2 W, 23 dBm) @ LTE
- Supply voltage: Nominal: 3.8 VDC/ Range: 3.3 - 4.2 VDC
* Approvals
- FCC /IC, PTCRB , (North America)
- RCM (Australia)