PEGGAS - 3/4" Shaft - MAX 3200 PSI 2.5 GPM - Horizontal Pump - Oil Sealed,Brass

Description

PEGGAS - Blast away all Dirt, Grime, away forever!
PEGGAS - High-Quality Aluminium Horizontal Pressure Washer Pump!
The Perfect Accessory For Anyone Who Pressure Washes! You Will Never Want Any Other Brand Following The High-Quality You Will See In All PEGGAS Accessories!
PEGGAS PW29/2.5C - Technical Specifications Sheet!
Fits many models:
Homelite 308653057 - Powerstroke 30841800, PS80522, PS80903A, PS80903B - Delta DXPW3025 G2400HH - Homelite UT80522, UT80953, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E - MH5500H-1 M5500H-2 M5500H-3 , Karcher G3050OH - Generac 308418007 HL252300, Generac 01675, 01675-0, 1675, 1675-0, G24H - Troy-Bilt 020241, 020242, 020241-0 - Comet BXD2528, BXD2527G - Craftsman 580.752600 580.752601 - Generac AXD2524GT-22MM, AXD3025G - Simpson MSH3125, MSH3125-S - Annovi Reverberri SJV25G27D-F7-EZ, AR MV25G30D - OEM Technologies FNA520002 (SIMPSON 520002)
Engines: OEM Himore 309515003 Engines, Honda GC190
AND many other models.
(Does Not Fit Excell engine's w/ 7/8" shaft )
THIS PUMP IS EXCLUSIVELY FOR HORIZONTAL ENGINES WITH A 3/4" SHAFT
Shaft Diameter: 3/4" Keyed Hollow Shaft
THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE w/ 3/4 Shafts
,
NOT A 7/8 SHAFT & NOT VERTICAL ENGINES.
Models stated in the listing are potential matches only and NOT a 100% confirmation of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)***
Fits Honda Excell units with 3/4 shaft only!!! Some Excell units have the 7/8 shaft and this pump will not work!
**
Compare The Measurements of The PEGGAS PW29/2.5C To Your Pump! (Standard Size)
Horizontal Engines with 3/4" Shafts ONLY
FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
Shaft Depth: 2 5/8"
Hole Distance to hole - 2 9/16”
Keyway Size: 3/16"
PEGGAS Pump Measurements
Height: 7 1/2" (Inches) tall
Width: 5 5/16" (Inches) wide
PEGGAS Pump Measurements
Length: 8" (Inches) Length
Learn More About The PEGGAS Horizontal Pump With Our Diagram!
FITMENT - This pump comes with a standard 3/4” shaft which is most common for (5.5 - 6.5 HP), small Horizontal pressure washers.
Discharge Ports (1): 22mm Twist Connect (High-Pressure Hose)
Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
Comes with Built-In Unloader
Built-In Chemical Injector
Comes with a FREE Thermal Relief Valve
How to Install and Use Our PEGGAS Horizontal Pressure Washer Pump!
3/4 Inch Horizontal Shaft!
PUMP SPECIFICATIONS:
Type: Axial
Head Material: Forged Brass
Engine HP required: 5.5 HP (Minimum)
Max. Water Supply Temperature: 104°F
Self-suction: Yes
Pre-Oiled Ready to go!
3/4" Inch Horizontal Shaft Pump Mounted!
When installing, please ensure that the keyway is installed before running your pressure washer.
Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!
3/4 Inch Horizontal shaft pump in ACTION!
Max. Volume: 2.5 GPM Max.
Pressure Output : 3200 PSI Max.
Pump Speed: 3450 RPM
Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!
PEGGAS
Find Out About Our PEGGAS Product Line